Construction cost guide · AUD
How much does it cost to build a house in Australia?
Construction costs in Australia typically run about $780 to $1,820 per square metre for a standard-specification home — so the total depends mostly on floor area and finish level. The ranges below are order-of-magnitude benchmarks; for a figure tied to your actual drawings, generate a full measured bill of quantities priced in AUD using the ASMM6 standard.
Typical build cost by house size in Australia
| Home | Floor area | Estimated construction cost (USD) |
|---|---|---|
| Small home · 2-bedroom | ~90 m² | $70,200 – $163,800 |
| Standard family home · 3-bedroom | ~150 m² | $117,000 – $273,000 |
| Large home · 4-bedroom | ~240 m² | $187,200 – $436,800 |
Order-of-magnitude benchmarks at ~$780–$1,820 per m², construction only (excludes land, fees and site-specific works). For a figure tied to your actual drawings, generate a measured BoQ.
Get the real number for your build
Benchmarks tell you the ballpark. Upload your plans and get an itemised, priced bill of quantities in AUD, in the ASMM6 format Australia professionals use.
Generate my Australia BoQBuilding costs in Australia — frequently asked
How much does it cost to build a house in Australia?+
As a benchmark, standard-specification construction in Australia runs about $780–$1,820 per m². A 3-bedroom home of ~150 m² therefore lands roughly between $117,000 and $273,000, excluding land. Your real figure depends on specification, site conditions and current material prices — a measured BoQ from your drawings is the accurate way to know.
What is the cost per square metre to build in Australia?+
Around $780–$1,820 per m² for a standard finish. Luxury finishes push the top end higher; low-cost builds sit below the bottom. These are all-in construction costs, not including land or professional fees.
How do I get an accurate building cost for my own plans in Australia?+
Upload your dimensioned floor plans to Enormous Buildings. It measures the quantities and prices them in AUD (A$) using the ASMM6 standard that Australia quantity surveyors and lenders expect — a full bill of quantities in minutes, free to preview.
Does this cost include land, fees and finishes?+
The benchmark covers construction only — materials and labour to build. Land, statutory fees, professional fees and site-specific works are separate. A generated BoQ itemises the construction scope so you can add the rest.