🇦🇺 Hobart, Australia · Construction cost · 2026
How much does it cost to build a house in Hobart?
Building a house in Hobart costs roughly $1,406–$2,611 per m² ($131–$243 per ft²) in 2026. A 3-bedroom home of 150 m² (1,615 ft²) therefore lands around $210,900–$391,650 in construction cost, excluding land, professional fees and statutory charges. That is about 7% below the Australia national average.
Hobart runs at 0.93× the Australia national construction cost average — about 7% below the Australia national average. This page prices a house here at $1,406–$2,611 per m² ($131–$243 per ft²), breaks it down by house size, and sets out the local conditions that actually change what gets built: foundation depth, seismic and wind design, and whether the envelope needs insulating.
Build cost by house size in Hobart
| Home | Floor area | Construction cost (USD) |
|---|---|---|
| Small home · 2-bedroom | 90 m² (969 ft²) | $126,540 – $234,990 |
| Standard family home · 3-bedroom | 150 m² (1,615 ft²) | $210,900 – $391,650 |
| Large home · 4-bedroom | 240 m² (2,583 ft²) | $337,440 – $626,640 |
At $1,406–$2,611 per m² ($131–$243 per ft²). Construction only — land, professional fees and statutory charges excluded.
What drives cost in Hobart
| Regional cost level | 0.93× national | Labour rates, land logistics and local demand put Hobart about 7% below the Australia national average. |
| Foundation depth | 0.60 m | Design frost depth here is about 0.3 m, so footings must bear below it — deeper excavation, more concrete, more disposal than a frost-free region. |
| Seismic band | low | Nominal reinforcement and conventional detailing. |
| Wind band | normal | Conventional roof fixings are adequate. |
| Insulation | Required | An insulated envelope is a code requirement here and a meaningful line in the bill. |
How Hobart compares
Price your actual plans, not a regional average
Upload your dimensioned drawings and get an itemised bill of quantities priced in AUD (A$), measured from your real geometry.
Price my Hobart projectBuilding in Hobart — frequently asked
How much does it cost to build a house in Hobart?
+
Building a house in Hobart costs roughly $1,406–$2,611 per m² ($131–$243 per ft²) in 2026. A 3-bedroom home of 150 m² (1,615 ft²) therefore lands around $210,900–$391,650 in construction cost, excluding land, professional fees and statutory charges. That is about 7% below the Australia national average.
What is the cost per square metre to build in Hobart?
+
About $1,406–$2,611 per m² ($131–$243 per ft²) for a standard-specification home. Hobart runs at 0.93× the Australia national average, so the same house costs measurably less here than in the country as a whole.
Why is building in Hobart less expensive than the rest of Australia?
+
Labour rates, land logistics and local demand put Hobart about 7% below the Australia national average. Design frost depth here is about 0.3 m, so footings must bear below it — deeper excavation, more concrete, more disposal than a frost-free region.
Does this include land and fees?
+
No — construction cost only. Land in Hobart is often the largest single number in the whole project and varies far more than build cost does. Professional fees, statutory charges and connections are additional, commonly adding 15–30%.
How do I get an accurate figure for my own plans?
+
Upload your dimensioned floor plans and get an itemised bill of quantities measured to ASMM6 and priced in AUD — the quantities come from your real geometry rather than a regional average. Free to preview.