🇦🇺 Perth, Australia · Construction cost · 2026
How much does it cost to build a house in Perth?
Building a house in Perth costs roughly $1,452–$2,696 per m² ($135–$250 per ft²) in 2026. A 3-bedroom home of 150 m² (1,615 ft²) therefore lands around $217,800–$404,400 in construction cost, excluding land, professional fees and statutory charges. That is about 4% below the Australia national average.
Perth runs at 0.96× the Australia national construction cost average — about 4% below the Australia national average. This page prices a house here at $1,452–$2,696 per m² ($135–$250 per ft²), breaks it down by house size, and sets out the local conditions that actually change what gets built: foundation depth, seismic and wind design, and whether the envelope needs insulating.
Build cost by house size in Perth
| Home | Floor area | Construction cost (USD) |
|---|---|---|
| Small home · 2-bedroom | 90 m² (969 ft²) | $130,680 – $242,640 |
| Standard family home · 3-bedroom | 150 m² (1,615 ft²) | $217,800 – $404,400 |
| Large home · 4-bedroom | 240 m² (2,583 ft²) | $348,480 – $647,040 |
At $1,452–$2,696 per m² ($135–$250 per ft²). Construction only — land, professional fees and statutory charges excluded.
What drives cost in Perth
| Regional cost level | 0.96× national | Labour rates, land logistics and local demand put Perth about 4% below the Australia national average. |
| Foundation depth | 0.60 m | The ground does not freeze here, so depth follows bearing capacity rather than frost. |
| Seismic band | low | Nominal reinforcement and conventional detailing. |
| Wind band | high | Roof tie-downs and strengthened fixings are required. |
| Insulation | Not typically required | The climate does not demand an insulated envelope, which removes a whole cost element. |
How Perth compares
Price your actual plans, not a regional average
Upload your dimensioned drawings and get an itemised bill of quantities priced in AUD (A$), measured from your real geometry.
Price my Perth projectBuilding in Perth — frequently asked
How much does it cost to build a house in Perth?
+
Building a house in Perth costs roughly $1,452–$2,696 per m² ($135–$250 per ft²) in 2026. A 3-bedroom home of 150 m² (1,615 ft²) therefore lands around $217,800–$404,400 in construction cost, excluding land, professional fees and statutory charges. That is about 4% below the Australia national average.
What is the cost per square metre to build in Perth?
+
About $1,452–$2,696 per m² ($135–$250 per ft²) for a standard-specification home. Perth runs at 0.96× the Australia national average, so the same house costs measurably less here than in the country as a whole.
Why is building in Perth less expensive than the rest of Australia?
+
Labour rates, land logistics and local demand put Perth about 4% below the Australia national average. Local code requirements add to that: Nominal reinforcement and conventional detailing. Roof tie-downs and strengthened fixings are required.
Does this include land and fees?
+
No — construction cost only. Land in Perth is often the largest single number in the whole project and varies far more than build cost does. Professional fees, statutory charges and connections are additional, commonly adding 15–30%.
How do I get an accurate figure for my own plans?
+
Upload your dimensioned floor plans and get an itemised bill of quantities measured to ASMM6 and priced in AUD — the quantities come from your real geometry rather than a regional average. Free to preview.