🇦🇺 Australian Capital Territory, Australia · Construction cost · 2026
How much does it cost to build a house in Australian Capital Territory?
Building a house in Australian Capital Territory costs roughly $1,542–$2,864 per m² ($143–$266 per ft²) in 2026. A 3-bedroom home of 150 m² (1,615 ft²) therefore lands around $231,300–$429,600 in construction cost, excluding land, professional fees and statutory charges. That is about 2% above the Australia national average.
Australian Capital Territory runs at 1.02× the Australia national construction cost average — about 2% above the Australia national average. This page prices a house here at $1,542–$2,864 per m² ($143–$266 per ft²), breaks it down by house size, and sets out the local conditions that actually change what gets built: foundation depth, seismic and wind design, and whether the envelope needs insulating.
Build cost by house size in Australian Capital Territory
| Home | Floor area | Construction cost (USD) |
|---|---|---|
| Small home · 2-bedroom | 90 m² (969 ft²) | $138,780 – $257,760 |
| Standard family home · 3-bedroom | 150 m² (1,615 ft²) | $231,300 – $429,600 |
| Large home · 4-bedroom | 240 m² (2,583 ft²) | $370,080 – $687,360 |
At $1,542–$2,864 per m² ($143–$266 per ft²). Construction only — land, professional fees and statutory charges excluded.
What drives cost in Australian Capital Territory
| Regional cost level | 1.02× national | Labour rates, land logistics and local demand put Australian Capital Territory about 2% above the Australia national average. |
| Foundation depth | 0.60 m | The ground does not freeze here, so depth follows bearing capacity rather than frost. |
| Seismic band | low | Nominal reinforcement and conventional detailing. |
| Wind band | normal | Conventional roof fixings are adequate. |
| Insulation | Not typically required | The climate does not demand an insulated envelope, which removes a whole cost element. |
How Australian Capital Territory compares
Price your actual plans, not a regional average
Upload your dimensioned drawings and get an itemised bill of quantities priced in AUD (A$), measured from your real geometry.
Price my Australian Capital Territory projectBuilding in Australian Capital Territory — frequently asked
How much does it cost to build a house in Australian Capital Territory?
+
Building a house in Australian Capital Territory costs roughly $1,542–$2,864 per m² ($143–$266 per ft²) in 2026. A 3-bedroom home of 150 m² (1,615 ft²) therefore lands around $231,300–$429,600 in construction cost, excluding land, professional fees and statutory charges. That is about 2% above the Australia national average.
What is the cost per square metre to build in Australian Capital Territory?
+
About $1,542–$2,864 per m² ($143–$266 per ft²) for a standard-specification home. Australian Capital Territory runs at 1.02× the Australia national average, so the same house costs measurably more here than in the country as a whole.
Why is building in Australian Capital Territory more expensive than the rest of Australia?
+
Labour rates, land logistics and local demand put Australian Capital Territory about 2% above the Australia national average.
Does this include land and fees?
+
No — construction cost only. Land in Australian Capital Territory is often the largest single number in the whole project and varies far more than build cost does. Professional fees, statutory charges and connections are additional, commonly adding 15–30%.
How do I get an accurate figure for my own plans?
+
Upload your dimensioned floor plans and get an itemised bill of quantities measured to ASMM6 and priced in AUD — the quantities come from your real geometry rather than a regional average. Free to preview.