Construction cost guide · PKR
How much does it cost to build a house in Pakistan? (2026)
Pakistan is one of the lower-cost construction markets in the world, at about 20% of United States build costs. Construction here typically runs about $26–$48 per ft² ($280–$520 per m²) for a standard-specification home — so the total depends mostly on floor area and finish level. The ranges below are order-of-magnitude benchmarks; for a figure tied to your actual drawings, generate a full measured bill of quantities priced in PKR using the MES SMM / Composite Schedule of Rates practice standard.
Typical build cost by house size in Pakistan (2026)
| Home | Floor area | Cost per ft² | Estimated construction cost (USD) |
|---|---|---|---|
| Small home · 2-bedroom | ~969 ft² (90 m²) | $26–$48 | $25,200 – $46,800 |
| Standard family home · 3-bedroom | ~1,615 ft² (150 m²) | $26–$48 | $42,000 – $78,000 |
| Large home · 4-bedroom | ~2,583 ft² (240 m²) | $26–$48 | $67,200 – $124,800 |
Order-of-magnitude benchmarks at ~$26–$48 per ft² ($280–$520 per m²), construction only (excludes land, fees and site-specific works). For a figure tied to your actual drawings, generate a measured BoQ.
Your house in Pakistan, priced line by line in PKR.
Cost to build anything else in Pakistan
No drawings needed
Get a priced bill of quantities for your own house
The figures above are benchmarks for Pakistan. Tell us how big your build is and get the itemised version — every material and trade measured and priced in PKR, — without needing architectural drawings.
For contractors & quantity surveyors
Tendering in Pakistan every month?
A one-off bill suits a single project. If you tender regularly, a monthly plan brings the cost of each bill right down, with no card to re-enter each time.