Construction cost guide · CDF
How much does it cost to build a house in Democratic Republic of the Congo? (2026)
Democratic Republic of the Congo is one of the lower-cost construction markets in the world, at about 30% of United States build costs. Construction here typically runs about $420–$780 per m² ($39–$72 per ft²) for a standard-specification home — so the total depends mostly on floor area and finish level. The ranges below are order-of-magnitude benchmarks; for a figure tied to your actual drawings, generate a full measured bill of quantities priced in CDF using the DQE / DPGF standard.
Typical build cost by house size in Democratic Republic of the Congo (2026)
| Home | Floor area | Cost per m² | Estimated construction cost (USD) |
|---|---|---|---|
| Small home · 2-bedroom | ~90 m² (969 ft²) | $420–$780 | $37,800 – $70,200 |
| Standard family home · 3-bedroom | ~150 m² (1,615 ft²) | $420–$780 | $63,000 – $117,000 |
| Large home · 4-bedroom | ~240 m² (2,583 ft²) | $420–$780 | $100,800 – $187,200 |
Order-of-magnitude benchmarks at ~$420–$780 per m² ($39–$72 per ft²), construction only (excludes land, fees and site-specific works). For a figure tied to your actual drawings, generate a measured BoQ.
Your house in Democratic Republic of the Congo, priced line by line in CDF.
Cost to build anything else in Democratic Republic of the Congo
No drawings needed
Get a priced bill of quantities for your own house
The figures above are benchmarks for Democratic Republic of the Congo. Tell us how big your build is and get the itemised version — every material and trade measured and priced in CDF, — without needing architectural drawings.
For contractors & quantity surveyors
Tendering in Democratic Republic of the Congo every month?
A one-off bill suits a single project. If you tender regularly, a monthly plan brings the cost of each bill right down, with no card to re-enter each time.