🇺🇸 Utah, United States · Construction cost · 2026
How much does it cost to build a house in Utah?
Building a house in Utah costs roughly $122–$227 per ft² ($1,316–$2,444 per m²) in 2026. A 3-bedroom home of 1,615 ft² (150 m²) therefore lands around $197,400–$366,600 in construction cost, excluding land, professional fees and statutory charges. That is about 6% below the United States national average.
Utah runs at 0.94× the United States national construction cost average — about 6% below the United States national average. This page prices a house here at $122–$227 per ft² ($1,316–$2,444 per m²), breaks it down by house size, and sets out the local conditions that actually change what gets built: foundation depth, seismic and wind design, and whether the envelope needs insulating.
Build cost by house size in Utah
| Home | Floor area | Construction cost (USD) |
|---|---|---|
| Small home · 2-bedroom | 969 ft² (90 m²) | $118,440 – $219,960 |
| Standard family home · 3-bedroom | 1,615 ft² (150 m²) | $197,400 – $366,600 |
| Large home · 4-bedroom | 2,583 ft² (240 m²) | $315,840 – $586,560 |
At $122–$227 per ft² ($1,316–$2,444 per m²). Construction only — land, professional fees and statutory charges excluded.
What drives cost in Utah
| Regional cost level | 0.94× national | Labour rates, land logistics and local demand put Utah about 6% below the United States national average. |
| Foundation depth | 1.05 m | Design frost depth here is about 0.9 m, so footings must bear below it — deeper excavation, more concrete, more disposal than a frost-free region. |
| Seismic band | high | Reinforcement, tie beams and connection detailing all increase — an engineer must design the structure rather than rely on convention. |
| Wind band | normal | Conventional roof fixings are adequate. |
| Insulation | Required | An insulated envelope is a code requirement here and a meaningful line in the bill. |
How Utah compares
Price your actual plans, not a regional average
Upload your dimensioned drawings and get an itemised bill of quantities priced in USD ($), measured from your real geometry.
Price my Utah projectBuilding in Utah — frequently asked
How much does it cost to build a house in Utah?
+
Building a house in Utah costs roughly $122–$227 per ft² ($1,316–$2,444 per m²) in 2026. A 3-bedroom home of 1,615 ft² (150 m²) therefore lands around $197,400–$366,600 in construction cost, excluding land, professional fees and statutory charges. That is about 6% below the United States national average.
What is the cost per square foot to build in Utah?
+
About $122–$227 per ft² ($1,316–$2,444 per m²) for a standard-specification home. Utah runs at 0.94× the United States national average, so the same house costs measurably less here than in the country as a whole.
Why is building in Utah less expensive than the rest of the United States?
+
Labour rates, land logistics and local demand put Utah about 6% below the United States national average. Design frost depth here is about 0.9 m, so footings must bear below it — deeper excavation, more concrete, more disposal than a frost-free region. Local code requirements add to that: Reinforcement, tie beams and connection detailing all increase — an engineer must design the structure rather than rely on convention. Conventional roof fixings are adequate.
Does this include land and fees?
+
No — construction cost only. Land in Utah is often the largest single number in the whole project and varies far more than build cost does. Professional fees, statutory charges and connections are additional, commonly adding 15–30%.
How do I get an accurate figure for my own plans?
+
Upload your dimensioned floor plans and get an itemised bill of quantities measured to CSI MasterFormat divisions and priced in USD — the quantities come from your real geometry rather than a regional average. Free to preview.