Construction cost guide · AED
How much does it cost to build a house in United Arab Emirates? (2026)
United Arab Emirates is an upper-middle-cost construction market, at about 70% of United States build costs. Construction here typically runs about $91–$169 per ft² ($980–$1,820 per m²) for a standard-specification home — so the total depends mostly on floor area and finish level. The ranges below are order-of-magnitude benchmarks; for a figure tied to your actual drawings, generate a full measured bill of quantities priced in AED using the POMI standard.
Typical build cost by house size in United Arab Emirates (2026)
| Home | Floor area | Cost per ft² | Estimated construction cost (USD) |
|---|---|---|---|
| Small home · 2-bedroom | ~969 ft² (90 m²) | $91–$169 | $88,200 – $163,800 |
| Standard family home · 3-bedroom | ~1,615 ft² (150 m²) | $91–$169 | $147,000 – $273,000 |
| Large home · 4-bedroom | ~2,583 ft² (240 m²) | $91–$169 | $235,200 – $436,800 |
Order-of-magnitude benchmarks at ~$91–$169 per ft² ($980–$1,820 per m²), construction only (excludes land, fees and site-specific works). For a figure tied to your actual drawings, generate a measured BoQ.
Cost to build anything else in United Arab Emirates
Get the real number for your build
Benchmarks tell you the ballpark. Upload your plans and get an itemised, priced bill of quantities in AED, in the POMI format United Arab Emirates professionals use.
Generate my United Arab Emirates BoQBuilding costs in United Arab Emirates — frequently asked
How much does it cost to build a house in United Arab Emirates?+
As a benchmark, standard-specification construction in United Arab Emirates runs about $91–$169 per ft² ($980–$1,820 per m²). A 3-bedroom home of ~150 m² therefore lands roughly between $147,000 and $273,000, excluding land. Your real figure depends on specification, site conditions and current material prices — a measured BoQ from your drawings is the accurate way to know.
What is the cost per square foot to build in United Arab Emirates?+
Around $91–$169 per ft² ($980–$1,820 per m²) for a standard finish. Luxury finishes push the top end higher; low-cost builds sit below the bottom. These are all-in construction costs, not including land or professional fees.
How do I get an accurate building cost for my own plans in United Arab Emirates?+
Upload your dimensioned floor plans to Enormous Buildings. It measures the quantities and prices them in AED (د.إ) using the POMI standard that United Arab Emirates quantity surveyors and lenders expect — a full bill of quantities in minutes, free to preview.
Does this cost include land, fees and finishes?+
The benchmark covers construction only — materials and labour to build. Land, statutory fees, professional fees and site-specific works are separate. A generated BoQ itemises the construction scope so you can add the rest.