🇰🇭

Construction cost guide · KHR

How much does it cost to build a house in Cambodia? (2026)

Cambodia is one of the lower-cost construction markets in the world, at about 25% of United States build costs. Construction here typically runs about $350–$650 per m² ($33–$60 per ft²) for a standard-specification home — so the total depends mostly on floor area and finish level. The ranges below are order-of-magnitude benchmarks; for a figure tied to your actual drawings, generate a full measured bill of quantities priced in KHR using the SMM-influenced unit-price bill standard.

Generate a bill of quantitiesFree preview · Priced in KHR (៛)
Advertisement

Typical build cost by house size in Cambodia (2026)

HomeFloor areaCost per m²Estimated construction cost (USD)
Small home · 2-bedroom~90 m² (969 ft²)$350–$650$31,500 – $58,500
Standard family home · 3-bedroom~150 m² (1,615 ft²)$350–$650$52,500 – $97,500
Large home · 4-bedroom~240 m² (2,583 ft²)$350–$650$84,000 – $156,000

Order-of-magnitude benchmarks at ~$350–$650 per m² ($33–$60 per ft²), construction only (excludes land, fees and site-specific works). For a figure tied to your actual drawings, generate a measured BoQ.

Your house in Cambodia, priced line by line in KHR.

Cost to build anything else in Cambodia

Advertisement

No drawings needed

Get a priced bill of quantities for your own house

The figures above are benchmarks for Cambodia. Tell us how big your build is and get the itemised version — every material and trade measured and priced in KHR, — without needing architectural drawings.

For contractors & quantity surveyors

Tendering in Cambodia every month?

A one-off bill suits a single project. If you tender regularly, a monthly plan brings the cost of each bill right down, with no card to re-enter each time.

Get started freeCompare the options once you're in · cancel any time
Advertisement
Keep exploring
Advertisement

Get your bills of quantities free

Upload a floor plan and get a priced BoQ in minutes, in your country's format and currency. No card needed to start.