🇱🇺 Luxembourg · Reinforcement steel · Updated 2026
How much reinforcement steel do you need to build a house in Luxembourg?
A 150 m² single-storey house in Luxembourg needs roughly 1,420 kg of reinforcement steel — about 9.47 kg per m² of floor area. That is computed from Luxembourg construction conventions, including the local wastage allowance.
Reinforcement steel quantities for a house in Luxembourg, computed from how buildings are actually put up here rather than from a global average. The tables below run from a small 50 m² dwelling to a 400 m² family home, and the method section shows how to reproduce every figure by hand so you can adapt it to your own plan.
Reinforcement steel by house size in Luxembourg
| Floor area | Reinforcement steel required | Per m² of floor |
|---|---|---|
| 50 m² | 527 kg | 10.5 |
| 75 m² | 756 kg | 10.1 |
| 100 m² | 980 kg | 9.80 |
| 150 m² | 1,420 kg | 9.47 |
| 200 m² | 1,854 kg | 9.27 |
| 250 m² | 2,284 kg | 9.14 |
| 300 m² | 2,711 kg | 9.04 |
| 400 m² | 3,559 kg | 8.90 |
Single-storey. The per-m² rate falls as the house grows — a small house has more wall and roof per square metre of floor than a large one, which is why these are computed size by size rather than scaled from a single rate.
What drives the quantity in Luxembourg
| Factor | Local value | Effect |
|---|---|---|
| Slab reinforcement | 80 kg/m³ | Slabs are lightly reinforced by volume but there is a lot of slab. |
| Beam reinforcement | 130 kg/m³ | Beams carry bending, so steel density rises sharply. |
| Column reinforcement | 180 kg/m³ | The densest steel on the job — and the most expensive to get wrong. |
| Ring beam | 110 kg/m³ | Ties the walls together at wall-plate level; standard practice in loadbearing masonry. |
How to calculate it yourself
- 01
Take the concrete volume of each element type separately — slab, beam, column, ring beam.
- 02
Multiply each by its steel density in kg/m³ from the table above.
- 03
Add 5% for laps, and about 3% for cutting waste on bar schedules.
- 04
Convert to bar lengths only once an engineer has issued a bar bending schedule — these figures budget the steel, they do not design it.
Buying and site notes
- —These are planning densities, not a design. Reinforcement is the one material where a rule of thumb can put a building down; an engineer's schedule governs.
- —Steel prices move faster than any other construction material. A quantity fixed today is safe; a price fixed today is not.
- —Store clear of the ground and cover it. Loose surface rust is acceptable; pitting and flaking is not.
Get every material measured off your own plan
This page works from a representative footprint. Upload your dimensioned drawings and get the full schedule — every material, measured from your real geometry and priced in EUR (€).
Take off my drawingsReinforcement steel in Luxembourg — frequently asked
How much reinforcement steel does a house need in Luxembourg?
+
A 150 m² single-storey house in Luxembourg needs roughly 1,420 kg of reinforcement steel — about 9.47 kg per m² of floor area. That is computed from Luxembourg construction conventions, including the local wastage allowance.
How much reinforcement steel per square metre in Luxembourg?
+
About 9.47 kg per m² of floor area for a single-storey house. The figure is not linear across sizes — a small house has proportionally more wall and roof per m² of floor than a large one, which is why the table above is computed size by size rather than scaled from one rate.
What changes the quantity of reinforcement steel needed?
+
Slab reinforcement (80 kg/m³) — Slabs are lightly reinforced by volume but there is a lot of slab. Beam reinforcement (130 kg/m³) — Beams carry bending, so steel density rises sharply. Column reinforcement (180 kg/m³) — The densest steel on the job — and the most expensive to get wrong.
Is wastage included?
+
Where it applies, yes — a 5% allowance is carried on the perishable materials (walling units, tiles, paint). Bulk materials like sand and stone carry handling loss instead. Ordering the theoretical quantity with no allowance reliably means a second delivery at a worse price.
How accurate is this for my own house?
+
It is a planning quantity derived from a representative rectangular footprint, so it is the right order of magnitude and internally consistent — good for budgeting and for checking a supplier's list. It is not a measured takeoff of your plan. Upload your dimensioned drawings to get quantities measured off your real geometry and priced in EUR.
Are reinforcement steel prices included?
+
No, deliberately. Material prices in Luxembourg move week to week and vary by region, so a price printed on a static page would be wrong within a month. This page gives you the quantity — take that to two or three local suppliers and the price will be current and competitive.