🇺🇸 United States vs 🇻🇺 Vanuatu · Construction cost comparison
Cost to build: United States vs Vanuatu
Building is cheaper in Vanuatu. On our construction cost index Vanuatu sits at 55 against the United States at 100 (United States = 100), so the same building costs roughly 45% less to construct there. A standard 150 m² three-bedroom house runs about $210,000–$390,000 in the United States and $115,500–$214,500 in Vanuatu.
A side-by-side comparison of what it costs to build in the United States and Vanuatu — and, more usefully, why they differ. The gap is not just labour rates: the two markets measure bills to different standards, build walls to different thicknesses, found at different depths and face different code requirements. All of that is below, computed from each country's own construction conventions.
Cost, side by side
| 🇺🇸 United States | 🇻🇺 Vanuatu | |
|---|---|---|
| Construction cost index (US = 100) | 100 | 55 |
| Cost per m² (standard house) | $1,400 – $2,600 | $770 – $1,430 |
| 150 m² three-bedroom house | $210,000 – $390,000 | $115,500 – $214,500 |
| Local currency | USD ($) | VUV (VT) |
Order-of-magnitude benchmarks in USD for comparability, construction cost only — excluding land, professional fees and statutory charges in both markets.
Why the two markets differ
The headline gap is labour and materials. The differences below are the ones that actually change the building — and therefore change the bill for an identical drawing.
| Factor | United States | Vanuatu |
|---|---|---|
Measurement standard Different standards. A bill measured for one market normally has to be re-measured before contractors in the other will price it competitively. | CSI MasterFormat divisions | SMM7 |
External wall construction Wall thickness and unit format change the masonry quantity for an identical floor plan — one of the reasons the same drawing has a different bill in each country. | 150 mm, 0/m² | 225 mm, 110/m² |
Mortar mix Richer mortar consumes more cement across the whole building — a small ratio difference is a large bill difference. | 1:3 | 1:5 |
Foundation depth Frost drives depth where the ground freezes: deeper footings mean more excavation, more concrete and more disposal before anything is visible above ground. | 0.75 m | 0.60 m |
Seismic band Seismic detailing adds reinforcement and connection work throughout the structure — typically 5–15% on structural cost in the higher band. | low | high |
Wind band Higher wind bands require tie-downs and strengthened fixings, and cyclonic zones add impact-rated glazing. | normal | cyclonic |
Insulation required An insulation requirement adds a whole element to the envelope — commonly 4–8% of construction cost, plus the glazing upgrade that usually comes with it. | Yes | No |
Foul drainage On-site treatment is commonly 3–6% of the cost of a house and sits in external works, where budgets are cut first and missed most often. | Municipal sewer | Septic tank & soakaway |
Roof pitch convention Pitch converts plan area into real roof surface — a steeper convention buys more covering, timber and labour for the same footprint. | 30° | 25° |
United States vs Vanuatu — frequently asked
Is it cheaper to build in the United States or Vanuatu?
+
Building is cheaper in Vanuatu. On our construction cost index Vanuatu sits at 55 against the United States at 100 (United States = 100), so the same building costs roughly 45% less to construct there. A standard 150 m² three-bedroom house runs about $210,000–$390,000 in the United States and $115,500–$214,500 in Vanuatu.
What is the cost per square metre in each?
+
About $1,400–$2,600 per m² in the United States and $770–$1,430 per m² in Vanuatu, for a standard-specification single-storey house. Rates rise with storey height and specification in both markets.
Why is there a difference at all?
+
Three things dominate: labour cost, how much of the material basket has to be imported, and what the building code requires. Here the code difference is visible — United States requires an insulated envelope and Vanuatu does not, which is a whole cost element.
Can I use the same drawings in both countries?
+
Not directly. Beyond the code differences, the United States measures to CSI MasterFormat divisions and Vanuatu to SMM7, so the bill has to be re-measured before local contractors will price it properly.
How do I get a real figure rather than a benchmark?
+
Upload your dimensioned floor plans and generate a measured bill of quantities for whichever market you are building in — priced in USD or VUV, in that country's own measurement standard, with every rate source-cited.